There is no official exact flow rate value available. However, typically, for a water pump used in an engine cooling system like this, the flow rate is estimated to be in the range of 30 - 120 cubic meters per hour. This range is crucial to ensure sufficient coolant circulation to meet the engine's cooling requirements. The actual flow rate may vary depending on factors such as the pump's rotational speed and the characteristics of the cooling system.
Head Pressure
In general, the head pressure for this type of engine - cooling water pump is expected to be in the range of 8 - 40 meters. The working pressure usually does not exceed 1.0 MPa. It's assumed that this water pump's head pressure falls within this typical range. Adequate head pressure is necessary to overcome the resistance in the cooling system and ensure effective coolant distribution.
Physical Dimensions
Overall Dimensions
Length: Exact length dimensions are not provided. Commonly, the length of such water pumps for similar engines can range from 200 - 400 mm. The length is an important factor for installation as it determines the space the pump occupies in the engine compartment.
Width: The width measurement is also not specified. Typically, the width of these pumps is around 100 - 200 mm. The width affects the fit of the pump and the clearance it requires among other engine components.
Height: There is no precise height value given. Usually, the height of this kind of water pump is approximately 150 - 300 mm. The height is significant for proper installation and to avoid interference with other parts.
